Video by CamTech E-Learning via YouTube
Source

Tired of your Apple Watch Series 3 running out of juice too quickly? Learn how to give your trusty timepiece a new lease on life by replacing its battery. In this detailed tutorial, we’ll walk you through the step-by-step process of swapping out your Series 3’s battery, ensuring your watch stays charged and ready for action.

Tools Required:

* Phillips head screwdriver (small size)
* Suction cup or iOpener (heat tool)
* Tweezers
* Razor Blade
* Glue (just in case)

Steps:

* Turn Off Your Apple Watch: Press and hold the side button until the power off slider appears, then swipe to turn it off.
* Remove the Band: Press the release button on the back of the watch and slide the band off.
* Pry Open the Case:
* Using a suction cup: Place the suction cup on the display and pull firmly to create a gap between the case and the screen.
* Using an iOpener: Heat the back of the watch for about 2 minutes to soften the adhesive, then use a pry tool to create a gap.
* Separate the Screen: Carefully pry around the edges of the screen to separate it from the case. Work slowly and avoid applying excessive force.
* Disconnect the Battery: Locate the battery connector, which is usually a small cable attached to the battery. Use a spudger or a small flathead screwdriver to gently pry up the connector.
* Remove the Old Battery: Once the connector is disconnected, carefully remove the old battery from the case.
* Prepare the New Battery: Ensure the new battery is compatible with your Apple Watch Series 3 model. Remove any protective packaging.
* Install the New Battery: Align the new battery with the battery compartment and gently press it into place.
* Reconnect the Battery: Connect the battery cable to its connector, ensuring a secure connection.
* Reassemble the Watch: Carefully align the screen with the case and press it firmly to seal it. Remove any excess adhesive.
* Replace the Band: Slide the band back onto the watch and secure it with the release button.
* Turn On Your Apple Watch: Press and hold the side button to turn on your device.

** Important Notes:

* Adhesive: The adhesive that holds the screen and case together can be difficult to remove. If you encounter issues, consider using a heat gun or * iOpener to soften the adhesive.
* Damage: If you’re not comfortable with the disassembly process or encounter difficulties, it’s best to seek assistance from a professional technician.
* Warranty: Replacing the battery yourself may void your Apple Watch warranty.

By following these steps carefully, you should be able to successfully replace the battery on your Apple Watch Series 3.

#applewatchrepair #AppleWatchSeries3 #BatteryReplacement
#WatchRepair #AppleWatchBattery #TechTutorial
#DoItYourself

Go to Source