Video by Virginia E-Learning via YouTube
Source

Take a look at the first lesson of our course of Robot Structural for designing and analysis of reinforced concrete structures!
To get this full course please visit:
Autodesk Robot 2023 Tutorial | RC | I
During this step by step course you will learn:

Designing, Analysis & Documenting of Reinforced Concrete Structures.
Static Analysis of Reinforced Concrete Frames.
Static Analysis of Small Reinforced Concrete Buildings.
Assignment of Load Cases & Combinations (Including Characteristic, Frequent & Quasi-permanent combinations).
Analysis of the Structural Model under both the ACI and Eurocode.
Designing of Reinforced Concrete Sections for Beams and Columns.
Designing of 2-Way Reinforced Concrete Slabs.
Designing & Calculation of the Reinforcement Steel for Beams and Columns.
Designing & Calculation of the Reinforcement Steel for Slabs.
Introduction to the Basic Designing of Footings.
Generating the Detail Drawings for the Reinforcement Steel of Beams, Columns & Slabs.
Analysis of the Diagrams of the Axial, Shear Forces & Deformations in the Structure.
Including Compression and Tension forces produced across the Structure.
Analysis of the Maps for the Principal and von Mises Stresses.
Obtaining the Calculation Notes & Documents of the Project.
Analysis and Resolution of common issues which may arise during the designing of the RC Sections & Reinforcement Steel.
Professional Online Consultancy for all topics covered in this course.

#StructuralAnalysis #steelstructure #structuralengineering #concretedesign #concretestructure

Go to Source